The TS2 represents the latest innovations in extreme heavy duty tree and brush cutting. These teeth and discs are offered on all new Turbo Swa units. The cutting disc can be adapted to special applications. Please contact the factory for details.
• Mining grade carbide teeth attach to steel back for maximum impact strength.
• Easy replacement using ratcheting wrench.
• A counter sunk set bolt. No wear on bolt heads.
• A 1" tooth allows for easy tracking through the tree trunks while still using minimal power to operate.
• Aggressive cutting angle cuts efficiently even in dense hardwoods.
• Minning grade carbide cutting surface can contact the ground to cut stumps below ground.
• Teeth have 4 usable edges with 200 to 500 hours service life.
Safety is a primary concern of Dougherty Forestry Mfg. Each turbo saw has more standard safety features than the competition.
EXPANDED METAL: Heavy expanded metal places a barrier between the operator and the material being cut. This keeps limbs from entering the cab on bushy trees.
BLADE SHIELD: A shield behind the blade prevents sawdust from being directed towards the operator.
V SHIELD: V shield above the expanded metal deflects limbs to the side of the machine.
Hydraulic buffer stops the blade in less than 5 seconds. The operator's manual is contained within a waterproof canister
SAFELY DIRECT FALLING TREES:
The pushing guard above the cutting disc gives the operator valuable leverage against the trunks of standing trees so they will fall forward away from the operator. The operator puts leverage on the tree while the tree is still connected to stump leaving a hinge to control the fall of the tree.
There is no maintenance or adjustment on the drive train for up to 800 to 1200 hours. The hydraulic motor which has a spline output that mates directly with the bearing block. There are no shear pins or chain couplers.
ANTI WRAP FEATURE:
HIGH SPEED CUTTING DISC The cutting disc on the Turbo Saw turns 2,000 rpms. The teeth move at a higher speed, while making a smaller bite thus increasing efficiency and multiplying available power. This speed allows the Turbo Saw to cut brush as well as trees.
HARDENED SKID PLATE A hardened, machined skid plate is placed beneath the blade to protect the fasteners during ground contact.
EXCELLENT VISIBILITY The Turbo Saw is designed to allow the operator excellent visibility to see the stump being left. By angling the disc slightly downward the stump is cut below ground level. The stump is smooth and will not damage tires or harm livestock.
A 5 gallon poly sprayer tank and 12 volt electric pump is standard on every Turbo Saw. An adjustable spray tip is located behind the blade shield. The spray tip is recessed into the frame to limit damage. The poly tank is rated to withstand all herbicides and diesel fuel.
The Turbo Saw is engineered with a generous roll back angle so the operator has the flexibility to reach difficult areas. The 7' boom allows for trimming up to 18' high depending on the skid loader and the Turbo Saws come with a standard quick attach plate for all modern skid loaders. This makes attaching a Turbo Saw quick and easy.